| Description | 2002 GMC C7500 2-door chassis, reconditioned tanker |
| Engine | Caterpillar 7.2L, 210HP, diesel |
| Transmission | Allison Automatic |
| GVW | 33000 |
| Steering | Power |
| Tilt | Front nose |
| Brakes | Air |
| Tank | 2000 gallon, epoxy coated steel, baffled. Portable drop tank holder on driver's side of tank. Newton 10" dump valve on rear. 2 ½" direct rear tank fill. Ladder to access top rear of tank. Tank is constructed of 100% mild steel. The sides are constructed of 10 gauge mild steel. The bottom and ends of the tank are constructed of 3/16" inch mild steel. The baffles are constructed of 10 gauge mild steel and consist of 3 cross baffles and one linear baffle creating eight equal 3'x 3' self venting chambers. All wet sides are double welded. Tank is constructed in a t-shape design and mounted as where no sub frame is necessary. Tank is epoxy coated to prevent rust/corrosion. |
| Pump | Gorman-Rupp 400GPM, self priming PTO, 3" tank to pump line |
| Guages | 4 ½" Master vacuum 30-0-400 liquid filled gauge, individual 2 ½" liquid filled gauges on all pump discharges, FRC Tankvision tank level gauge on driver's side pump panel |
| Discharge | 2 ½" discharge, driver's side with valve, cap, and chain, 2 ½" discharge, officer's side with valve, cap, and chain |
| Intake | Officer's side 2 ½" intake with caps and chains |
| Hose | Hose lay, hose bed area on driver's side of tank |
| Chassis Paint | Red with white scotchlite stripe all the way down the cab and body |
| Front Bumper | Painted steel |
| Compartments | 2-large box compartments, one each side of truck, in front of rear wheels |
| Fuel Tank | 50 gallon, driver's side |
| Seating | Driver's side air ride bucket seat with passenger's two man bench |
| Electrical | A master disconnect switch is located underneath the driver's side seat. All electrical components are harnessed through an electrical sub panel located inside the cab behind the driver's side seat. A diagram of the sub panel and electrical wiring is provided. All wires are loomed and butted as to ensure easy replacement of any damaged or defective lighting and/or wiring. Electrical components installed are to include but not limited to:
|
| Additional Features | AM/FM radio, air conditioning, stainless steel wheel simulators - front and back |
| Price | Call for price |
| Date Updated | 03/05/2010 |
| Photos | 
|
 |
Good Hope Fire Apparatus, Inc. 161 Scott Drive • Cullman, AL 35055 Tel: 256-739-6457 • Fax: 256-737-9275 Toll Free:1-800-541-8760 goodhopefire@powernet.org 
|
 Member |